Smart plug (Zigbee) giá rẻ (~$15) thay thế smart appliance nhờ ưu điểm tiết kiệm chi phí, tránh lệ thuộc cloud, kéo dài tuổi thọ thiết bị và giảm rác thải điện tử. Chúng theo dõi dòng điện, kích hoạt tự động hóa (Home Assistant) như thông báo kết thúc chu trình, tính toán chi phí năng lượng hay ngắt an toàn mà không cần internet.
Vì sao nên đọc: Lập trình viên nên đọc bài này để hiểu cách xây dựng hệ thống nhà thông minh tự động hóa hiệu quả bằng cách kết hợp các thiết bị cơ bản với các công cụ mở nguồn như Home Assistant, giảm chi phí và tránh phụ thuộc vào dịch vụ đám mây đắt tiền.
Nguồn: https://www.xda-developers.com/stop-buying-smart-appliances-and-start-buying-smart-plugs. 8sync News chỉ tóm tắt và dẫn link; bản quyền nội dung thuộc tác giả và nguồn gốc.
Một giám đốc cấp cao tại GitHub chia sẻ cách cô ấy xây dựng 40 quy trình tự động hóa bằng ứng dụng GitHub Copilot trên desktop để quản lý khối lượng công việc vô hình của vai trò lãnh đạo cấp cao. Những tự động hóa này kết nối với lịch, email, Slack và kho lưu trữ GitHub thông qua tích hợp MCP để xử lý chuẩn bị họp, sàng lọc hàng ngày, theo dõi triển khai, phát hiện PR cũ và nhật ký sự nghiệp. Cô coi tự động hóa như một công cụ hỗ trợ khả năng tiếp cận cho người mắc AuDHD, thu hẹp khoảng cách giữa những ngày có chức năng điều hành tốt và kém.
Lập trình viên nên đọc bài này để hiểu cách áp dụng tự động hóa công cụ AI như Copilot không chỉ tiết kiệm thời gian mà còn nâng cao hiệu quả làm việc và quản lý dự án thông qua cách tiếp cận thiết thực, từ nhỏ đến lớn.
Rompass đã phát triển một firmware tương tự BIOS cho vi điều khiển ESP32-C6, cung cấp bootloader và lớp API hỗ trợ tải động các chương trình từ RAM, thậm chí qua mạng. Dự án thể hiện xu hướng xóa nhòa ranh giới giữa vi điều khiển và bộ vi xử lý, xu hướng này sẽ tiếp tục khi các bộ xử lý ứng dụng mạnh mẽ như ESP32-P4 trở nên phổ biến.
Lập trình viên ESP32-C6 nên đọc để khám phá cách mở rộng khả năng quản lý khởi động và chạy ứng dụng động từ RAM hoặc mạng, giúp tối ưu hóa hiệu suất và linh hoạt cho các dự án yêu cầu tính linh hoạt cao hơn.
A ranked comparison of ten contract management platforms for 2026, evaluated on AI-assisted review, repository search, renewal control, and workflow automation. Gatekeeper tops the list for combining AI contract review with vendor risk and spend tracking in one system. Ironclad and Juro lead for workflow speed, DocuSign CLM for signing reach, and Icertis and Sirion for enterprise-scale governance. Pricing ranges from $19/seat/month (PandaDoc) to six-figure enterprise implementations (Icertis). Key buying criteria include AI review depth, renewal alerting, and total cost of ownership including users and implementation.
Geoffrey Wells designed ChillPoint, a handheld iButton reader built around an ESP32-C6 microcontroller, aimed at modernizing cold chain logistics data retrieval. The device uses a 1-Wire probe to read iButton temperature data loggers on contact, stores data on internal flash, and hosts a web UI over its own WiFi access point for easy access from any smartphone, tablet, or laptop. Both hardware and software will be open source, with a CrowdSupply campaign planned for release.
OpenC6 BIOS is an open-source project that brings PC BIOS-like architecture to the ESP32-C6 microcontroller. Instead of combining hardware setup and application code into a single firmware image, it separates the base system from application payloads (2–10 KB). Key features include dynamic CPU frequency scaling, a System Call Interface (ABI) for Wi-Fi/crypto/math access without full ESP-IDF, PXE-like network boot over Wi-Fi, A/B OTA updates with rollback, a web-based BIOS setup interface, LP-Core health monitoring using the ESP32-C6's low-power RISC-V core, and Aura Sync RGB support. The project targets ESP32-C6 boards with at least 8MB flash and is available on GitHub under the MIT license.
Quectel has officially launched the FCM365X, a compact 25.5×18mm IoT module built on the NXP RW612 wireless MCU. It supports dual-band Wi-Fi 6, Bluetooth 5.4 LE, and 802.15.4 (Zigbee, Thread, Matter over Thread), with 8MB SPI flash and optional PSRAM — making it the only RW612-based module currently offering on-module PSRAM. The module exposes a wide range of interfaces (GPIO, UART, USB, I2C, I2S, ADC, LCD, PWM) via LCC+LGA packaging and operates from -40°C to +85°C. Development is SDK-based via QuecOpen; AT command firmware is not available. Two development boards are planned but details and pricing are not yet published.
A Samsung Galaxy user shares four preinstalled apps they always remove: Samsung Browser (replaced by Chrome for cross-device consistency), Samsung Notes (replaced by Google Keep for web accessibility), Samsung TV Plus (unused ad-supported streaming service), and Samsung Global Goals (a charity app they prefer not to use). The author clarifies these aren't truly bloatware — they're decent apps — but cross-platform compatibility with iPhone, iPad, MacBook, and Windows PC makes Samsung's ecosystem apps redundant for their workflow.
Microsoft is raising Xbox console prices worldwide effective August 2, citing a components crisis driving up storage and memory costs by more than 2.5x. The Xbox Series S 512GB jumps from $399.99 to $499.99, the Series S 1TB from $449.99 to $599.99, the Series X Digital from $599.99 to $749.99, and the Series X from $649.99 to $799.99. The 2TB model is being discontinued. Microsoft notes consoles are sold below cost and points to buy-now-pay-later options and refurbished console programs to help with affordability. The announcement follows Valve's Steam Machine also launching at higher-than-expected prices due to similar hardware supply issues.