Rouse is firmware that turns ESP32 development boards into a smart alarm clock without accounts, subscriptions or a companion app. It runs on boards like the Waveshare ESP32-S3-Touch and the Cheap Yellow Display, and configuration happens through a web interface that any web browser can access. Firmware updates happen over the network but only with user approval. A build guide covers adding buttons and a speaker, and 3D-printable enclosure files are provided for the finished clock.
Nguồn: https://hackaday.com/2026/11/08/a-smart-alarm-clock-that-doesnt-sell-your-soul. 8 Sync News chỉ tóm tắt và dẫn link; bản quyền nội dung thuộc tác giả và nguồn gốc.
Đọc tin ở đây, luyện code, học theo lộ trình và luyện IELTS trên các sản phẩm anh em — tất cả kết nối với nhau trong hệ sinh thái 8 Sync.
Cổng chính của hệ sinh thái: giới thiệu sản phẩm, blog và bảng giá trọn bộ.
Khám pháHọc theo lộ trình rõ từng chặng: video, quiz chấm tự động, certificate và mentor đang làm nghề.
Xem lộ trình1.000 bài DSA, đề tiếng Việt, chấm tự động 7 ngôn ngữ — nhiều bài FREE, chạy ngay trên trình duyệt.
Luyện miễn phíChấm bốn kỹ năng IELTS bằng AI, phản hồi chi tiết theo rubric.
Dùng thử miễn phíAI IDE 22 MB cho dev Việt.
Tải miễn phíBộ nhớ tổ chức cho AI agent.
Khám pháAI trực Fanpage, tự sàng lọc lead.
Dùng thửOpenTubeX is a YouTube client that lets you watch videos without a Google account and keep your viewing history under your control.
Turns out, it isn't just about lowering temperatures.
My local LLM replaces yet another subscription for effectively $0
A Fluke Model 407 high-voltage power supply gets rescued from the scrap heap and diagnosed on video. Mr Carlson powers it up safely using an isolated transformer and a current-limited variac, avoiding the risk of full power on old components. The vacuum-tube-and-circuit-board unit shows no visible damage but its output misbehaves. Using the original schematics, he traces the fault to a single faulty capacitor in the feedback loop that keeps output voltage constant.
Like some of you, we have several kitchen appliances with integrated digital timers.
SparkFun introduced two new development boards called IoT RedBoard, both based on the ESP32-P4 v3.x (ESP32-P4X) and compatible with the Arduino UNO R3
A maker transforms a Raspberry Pi gaming handheld into a DIY cyberdeck with GPS, Wi-Fi, a camera, and an ESP32. See the community build.
It was a little too good at what it did, though.
Đang tải bình luận…