All of your fave tunes, all of the time.
Nguồn: https://www.xda-developers.com/you-too-can-build-this-cute-esp32-internet-radio-controllable-with-just-a-dial. 8 Sync News chỉ tóm tắt và dẫn link; bản quyền nội dung thuộc tác giả và nguồn gốc.
Đọc tin ở đây, luyện code, học theo lộ trình và luyện IELTS trên các sản phẩm anh em — tất cả kết nối với nhau trong hệ sinh thái 8 Sync.
Cổng chính của hệ sinh thái: giới thiệu sản phẩm, blog và bảng giá trọn bộ.
Khám pháHọc theo lộ trình rõ từng chặng: video, quiz chấm tự động, certificate và mentor đang làm nghề.
Xem lộ trình1.000 bài DSA, đề tiếng Việt, chấm tự động 7 ngôn ngữ — nhiều bài FREE, chạy ngay trên trình duyệt.
Luyện miễn phíChấm bốn kỹ năng IELTS bằng AI, phản hồi chi tiết theo rubric.
Dùng thử miễn phíAI IDE 22 MB cho dev Việt.
Tải miễn phíBộ nhớ tổ chức cho AI agent.
Khám pháAI trực Fanpage, tự sàng lọc lead.
Dùng thửTurns out, it isn't just about lowering temperatures.
A Fluke Model 407 high-voltage power supply gets rescued from the scrap heap and diagnosed on video. Mr Carlson powers it up safely using an isolated transformer and a current-limited variac, avoiding the risk of full power on old components. The vacuum-tube-and-circuit-board unit shows no visible damage but its output misbehaves. Using the original schematics, he traces the fault to a single faulty capacitor in the feedback loop that keeps output voltage constant.
Like some of you, we have several kitchen appliances with integrated digital timers.
SparkFun introduced two new development boards called IoT RedBoard, both based on the ESP32-P4 v3.x (ESP32-P4X) and compatible with the Arduino UNO R3
A maker transforms a Raspberry Pi gaming handheld into a DIY cyberdeck with GPS, Wi-Fi, a camera, and an ESP32. See the community build.
It was a little too good at what it did, though.
What I run on my $10 USD OpenStick homelab
An $8 Ox64 RISC-V single-board computer can run full Linux, not a stripped-down MMU-less kernel. It has three different RISC-V cores, but ethernet, wifi and SD card don't work yet. Flashing it is painful: it must be programmed over UART, not USB, and DevCube crashes on Wayland so you need Xorg. A CH340G USB-UART dongle failed the handshake, so the author used an RP2040 (Adafruit KB2040) running picoprobe as a serial bridge, then had to modify bflb-mcu-tool's uart interface file to strip DTR/RTS handling before it would flash the M0 core.
Đang tải bình luận…