A hobbyist built a toddler-safe telephone that can only call pre-set family contacts. An ESP32-S3 acts as a USB host for a commercial retro-style handset and runs a minimal SIP client connecting over WiFi to a VoIP account, in this case Twilio. There are no inbound calls, so there's no risk of scam calls. Each contact gets an arcade button that lights up based on that contact's time zone, and a text-to-speech voice announces network errors or when it isn't call time.
Nguồn: https://hackaday.com/2026/11/03/toddler-phone-calls-family-and-no-one-else. 8 Sync News chỉ tóm tắt và dẫn link; bản quyền nội dung thuộc tác giả và nguồn gốc.
Đọc tin ở đây, luyện code, học theo lộ trình và luyện IELTS trên các sản phẩm anh em — tất cả kết nối với nhau trong hệ sinh thái 8 Sync.
Cổng chính của hệ sinh thái: giới thiệu sản phẩm, blog và bảng giá trọn bộ.
Khám pháHọc theo lộ trình rõ từng chặng: video, quiz chấm tự động, certificate và mentor đang làm nghề.
Xem lộ trình1.000 bài DSA, đề tiếng Việt, chấm tự động 7 ngôn ngữ — nhiều bài FREE, chạy ngay trên trình duyệt.
Luyện miễn phíChấm bốn kỹ năng IELTS bằng AI, phản hồi chi tiết theo rubric.
Dùng thử miễn phíAI IDE 22 MB cho dev Việt.
Tải miễn phíBộ nhớ tổ chức cho AI agent.
Khám pháAI trực Fanpage, tự sàng lọc lead.
Dùng thửTurns out, it isn't just about lowering temperatures.
A Fluke Model 407 high-voltage power supply gets rescued from the scrap heap and diagnosed on video. Mr Carlson powers it up safely using an isolated transformer and a current-limited variac, avoiding the risk of full power on old components. The vacuum-tube-and-circuit-board unit shows no visible damage but its output misbehaves. Using the original schematics, he traces the fault to a single faulty capacitor in the feedback loop that keeps output voltage constant.
Like some of you, we have several kitchen appliances with integrated digital timers.
SparkFun introduced two new development boards called IoT RedBoard, both based on the ESP32-P4 v3.x (ESP32-P4X) and compatible with the Arduino UNO R3
A maker transforms a Raspberry Pi gaming handheld into a DIY cyberdeck with GPS, Wi-Fi, a camera, and an ESP32. See the community build.
It was a little too good at what it did, though.
All of your fave tunes, all of the time.
What I run on my $10 USD OpenStick homelab
Đang tải bình luận…