M5Stack's Core Matrix is an ESP32-C61-based IoT controller with a 16×16 white LED matrix for displaying icons, animations, device status, and
Nguồn: https://www.cnx-software.com/2026/11/09/m5stack-core-matrix-esp32-c61-iot-controller-features-16x16-led-matrix-wifi-6-and-6-axis-imu. 8 Sync News chỉ tóm tắt và dẫn link; bản quyền nội dung thuộc tác giả và nguồn gốc.
Đọc tin ở đây, luyện code, học theo lộ trình và luyện IELTS trên các sản phẩm anh em — tất cả kết nối với nhau trong hệ sinh thái 8 Sync.
Cổng chính của hệ sinh thái: giới thiệu sản phẩm, blog và bảng giá trọn bộ.
Khám pháHọc theo lộ trình rõ từng chặng: video, quiz chấm tự động, certificate và mentor đang làm nghề.
Xem lộ trình1.000 bài DSA, đề tiếng Việt, chấm tự động 7 ngôn ngữ — nhiều bài FREE, chạy ngay trên trình duyệt.
Luyện miễn phíChấm bốn kỹ năng IELTS bằng AI, phản hồi chi tiết theo rubric.
Dùng thử miễn phíAI IDE 22 MB cho dev Việt.
Tải miễn phíBộ nhớ tổ chức cho AI agent.
Khám pháAI trực Fanpage, tự sàng lọc lead.
Dùng thửA leaked Raspberry Pi DeviceTree file reveals hardware details of the Pi Zero 3W, including a BCM2711 chip, PCIe support, a power button, an extra LED, and an eMMC option. This serves as the entry point for an intro to DeviceTree, the format that tells Linux kernels what CPU, drivers, and interfaces a board has. DeviceTree source files (.dts, .dtsi) compile into binary .dtb/.dtbo files the kernel reads, and the device-tree-compiler package handles both compiling and decompiling. The guide covers includes, base files, and overlays, recommends learning from Raspberry Pi's overlay directory and repos like Radxa and Armbian, and warns that LLMs sometimes hallucinate overlay properties.
Like some of you, we have several kitchen appliances with integrated digital timers.
SparkFun introduced two new development boards called IoT RedBoard, both based on the ESP32-P4 v3.x (ESP32-P4X) and compatible with the Arduino UNO R3
A maker transforms a Raspberry Pi gaming handheld into a DIY cyberdeck with GPS, Wi-Fi, a camera, and an ESP32. See the community build.
Image compression at 4bpp with extreme decompression speed - raphlinus/nibnib
All of your fave tunes, all of the time.
Trên các chuyến bay ồn ào, tiếng động cơ liên tục gây khó khăn trong việc nghe nhạc hay podcast. Các tai nghe chống ồn hoạt động bằng cách thu âm thanh môi trường và tạo ra tín hiệu âm ngược pha với tần số 35Hz đến 2000Hz, phù hợp với dải tần tiếng ồn phổ biến. Công nghệ ANC (Active Noise Cancellation) sử dụng microphone exterior để phân tích âm thanh vàDSP (Digital Signal Processor) để tạo ra âm thanh đối nghịch. Kết quả là hệ thống có thể giảm tới 20dB tiếng ồn tại dải tần thấp, giúp người nghe có trải nghiệm tốt hơn mà không cần tăng âm lượng lên mức có hại.
Bài giải thích cách tai nghe chống ồn hoạt động sẽ giúp lập trình viên hiểu được các thuật toán xử lý tín hiệu thời gian thực được áp dụng trong thực tế.
An $8 Ox64 RISC-V single-board computer can run full Linux, not a stripped-down MMU-less kernel. It has three different RISC-V cores, but ethernet, wifi and SD card don't work yet. Flashing it is painful: it must be programmed over UART, not USB, and DevCube crashes on Wayland so you need Xorg. A CH340G USB-UART dongle failed the handshake, so the author used an RP2040 (Adafruit KB2040) running picoprobe as a serial bridge, then had to modify bflb-mcu-tool's uart interface file to strip DTR/RTS handling before it would flash the M0 core.
Đang tải bình luận…